BMW E90 Shocker 3 Series

BMW E90 Shocker 3 Series About

The BMW E90 3 Series, produced from 2005 to 2013, is known for its excellent driving dynamics and handling. The shock absorbers (or shockers) in the E90 are a key component of its suspension system, helping to control the movement of the suspension and maintain tire contact with the road, ensuring a smooth and controlled ride.

Key Points about BMW E90 Shock Absorbers:

Function:

• Damping: Shock absorbers dampen the energy generated by the springs when the car encounters bumps and uneven surfaces.
• Control: They control the rate of suspension movement, preventing excessive bouncing and ensuring that the tires maintain contact with the road.
• Comfort and Handling: Properly functioning shock absorbers contribute to both ride comfort and vehicle handling.

Types of Shock Absorbers:

1. Standard Hydraulic Shocks: Use hydraulic fluid to dampen suspension movements.
2. Gas-Charged Shocks: Include a pressurized gas chamber to reduce foaming and maintain consistent performance.
3. Performance Shocks: Designed for enhanced handling and stability, often with adjustable settings.

Common Symptoms of Worn Shock Absorbers:

1. Excessive Bouncing: The car continues to bounce after hitting a bump.
2. Poor Handling: The vehicle feels unstable, especially when cornering or during quick maneuvers.
3. Nose Diving and Squatting: The front end dives during braking, and the rear squats during acceleration.
4. Uneven Tire Wear: Worn shocks can cause uneven tire wear due to poor contact with the road.
5. Fluid Leaks: Visible hydraulic fluid leaks on the shock absorbers.

Maintenance and Replacement:

• Inspection Interval: Shock absorbers should be inspected regularly, typically during routine maintenance checks.
• Replacement Interval: While the replacement interval can vary based on driving conditions, it's generally recommended to replace shock absorbers every 50,000 to 100,000 miles.
• Replacement Procedure:
  1. Lift the Vehicle: Safely lift and support the vehicle using a jack and jack stands.
  2. Remove the Wheel: Take off the wheel to access the shock absorber.
  3. Disconnect Components: Disconnect any components attached to the shock absorber, such as brake lines or sensors.
  4. Remove Old Shock Absorber: Unbolt and remove the old shock absorber from the vehicle.
  5. Install New Shock Absorber: Position and bolt the new shock absorber in place, ensuring it is properly secured.
  6. Reconnect Components: Reattach any components that were disconnected.
  7. Lower the Vehicle: Reinstall the wheel and safely lower the vehicle.
  8. Test Drive: Take the car for a test drive to ensure the new shock absorbers are functioning correctly.

Choosing the Right Shock Absorbers:

• OEM vs. Aftermarket: OEM shock absorbers are designed to meet the original specifications of the vehicle, while aftermarket options can offer various performance enhancements.
• Driving Conditions: Consider the typical driving conditions (e.g., city driving, highway, off-road) when selecting shock absorbers.
• Performance Preferences: If you prefer a sportier ride or enhanced handling, performance shock absorbers may be a better choice.